Browsed by
Tag: bathroom remodeling

How to Clean Your Dirty Grout in Just Minutes

How to Clean Your Dirty Grout in Just Minutes

Comments 0 Comment

Do you have dirty grout? Have you tried cleaning it? Does it not change? Do you scrub and scrub and nothing happens? Cleaning grout can be tough, but it doesn’t have to be – not with the right grout cleaner!

Grout is porous. It traps and absorbs all sorts of things including water, dirt, mold, mildew, and more. Remember that chocolate milk your son dropped on the floor last week? Likely, the grout sucked it up – even more likely if your grout isn’t sealed. Over time, the grout will change color and darken due to all the things it is absorbing, which makes your grout look dirty.

Regular household cleaners aren’t strong enough to clean the grout – many of these cleaners are too harsh and can break the grout. With the right grout cleaner, your tile and grout can look like new again in minutes!

Grout Shield’s grout and tile cleaner lifts tough stains from grout. It is easy to use, and you won’t have to scrub for hours. It is ph-balanced and safe to use on tile and grout. If you want to change the color of the grout, Grout Shield’s color sealer can be easily applied to grout and change your grout color in minutes! You’ll never know your grout had a stain! The color sealer will not stick to the tile only the grout. read more

How to Fix Cracked Grout with Grout Shield

How to Fix Cracked Grout with Grout Shield

Comments 0 Comment

Countertops usually settle, which often times means, you can find broken or missing grout in between the backsplash and the tile – this looks awful. It looks like your backsplash is old and broken. How can you repair this without retiling your entire backsplash? It is possible to do with Grout Shield products.

Here’s what you do:

  • Take a paper towel and measure it to the size of the crack.
  • Place it behind the crack. Push it in.
  • Get some grout to fill in the crack.
  • Mix in Grout Shield color sealer in the grout to match the color of the other grout.
  • Get a rubber trowel and bucket of water with a big sponge.
  • Spread the grout on the trowel and then push it in to the missing grout areas.
  • You can then use your finger to make a nice trim.
  • Take sponge to wipe off excess.

Check our video below to see how easy it is to repair grout by mixing in Grout Shield’s color sealer with grout to fix broken or missing grout lines.

This process also works for broken and missing grout in bathrooms.

Our color grout sealers come in 8 ounces (covers 250 square feet), 16 ounces (covers 500 square feet), and one gallon (covers 4,000 to 6,000 square feet). We also have a 2-ounce sample size that covers up to 10 square feet.

For more information on grout color sealers  or to purchase Grout Shield products, click our grout sealers   page, or call toll free at 1-800-631-0716.

The post How to Fix Cracked Grout with Grout Shield appeared first on Grout Shield | Grout Restoration System | Grout Cleaner. read more

Where and How to Use Grout Shield’s Clear Seal

Where and How to Use Grout Shield’s Clear Seal

Comments 0 Comment

Grout needs to be sealed. If not, it will absorb everything it comes in contact with such as dirt, water, food, debris, mold, and more. Grout Shield’s clear grout sealer is perfect for outside sidewalks, concrete, buildings, and new grout installations. Water just beads right off the grout sealer, which means your grout lines are protected from Mother Nature.

Grout Shield’s grout clear sealer can be used to seal new tile and grout installations, as well as all natural stones and outside concrete. With Grout Shield’s clear sealer, you can protect your newly laid tile and grout from becoming stained, dirty and discolored.

Grout Shield clear seal is easy to apply. You can use the squeeze top of the bottle to apply the sealer or use our brush applicator to spread on the sealer. You can even use your finger to rub out the brush strokes.

Check our video below to see how easy it is to use and apply Grout Shield’s clear sealer. In this video, you can actually see how well the sealer keeps water away. read more

Change the Color of Your Grout in Just Minutes

Change the Color of Your Grout in Just Minutes

Comments 0 Comment

Want to change the look of your room? Bored of the color of your grout? Or, is your grout clean but permanently stained? You don’t need to re-tile or re-grout your floor, which is very expensive. You can actually change the color of your grout with Grout Shield’s color grout sealer.

The color seal is so easy to use, even a kid can apply it! To use, just squeeze the color seal into the grout lines. Then, brush the seal in with an applicator brush, and wipe excess off with a chamois – it’s that easy.

Check our video below to learn how to recolor your grout and see how easy it us to apply. You can change the color of your grout in minutes without having to hire help or pay hundreds or thousands of dollars.

The Grout Shield color sealer is a penetrating sealer that is designed to revitalize and restore the desired color to your grout. Grout Shield color sealer is both a colorant and sealer that forms a protective barrier over your existing sanded or unsanded grout. We can match any color in the world for you, whether you want something new or want to keep or freshen up your current grout color. read more

What to Do if You Stained Your Grout

What to Do if You Stained Your Grout

Comments 0 Comment

Accidents happen. Spills, dirt, pet’s relieving themselves, mold – you name it, your tile and grout lines are up against a lot of gross things. Since grout absorbs everything it comes in contact with, it will stain easily. So, what can you do if, for example, you spilled soy sauce or red wine into your white grout lines? Or, if your children trekked mud in after a rainy day?

Your first plan of attack is to clean your grout with a proper grout cleaner. Most regular household cleaners are not formulated to get tough grout stains out. Also, most regular cleaners are too harsh and will actually breakdown your grout. You want to use Grout Shield’s Grout & Tile Deep Cleaner, which cleans and lifts deep stains out of the grout’s pores. To use this product, you mix 1 ounce of the cleaner with 8 ounces of warm water. Then, brush the cleaner into the grout with a brush applicator. Let the mixture sit into the grout lines for a few minutes. After the cleaner sits, wipe away the cleaner with a sponge and towel dry the floor. The discoloration will be gone. read more