Things To Do In SW Florida

‘Tis the season to be jolly…and clean! There’s a lot to do during the holidays, and cleaning happens to be one of the things likely on a to-do list, especially if you’re expecting a lot of guests or taking plenty of photos of your home.

To keep your home looking great, you should clean before, during, and after the holidays.

During the holidays, we know opening gifts, eating a feast, and spending time with loved ones is the focus, but cleaning cannot be forgotten. Two things in the home you need to pay attention to when cleaning is tiles and grout.

If your tiles and grout need a good cleaning before you have guests over this holiday season, you should invest in a quality tile and grout cleaner and sealer. Grout cleaner and sealer specifically made to clean the dirt out of grout and protect the grout will save you time and money. You will get your floors cleaned faster, so you have more time to entertain and spend with loved ones.

Before the holidays, use Grout Shield Grout & Tile Deep Cleaner.  This is good to use if you haven’t properly cleaned your grout in a long time. This tile & grout cleaner is good for lifting deep stains. It helps get tough-to-reach stains out of the pores. It’s easy to use! Just mix 1 oz of the deep cleaner with 8 oz of warm water. Brush product into the grout. Let the mixture sit on your grout for a few minutes. Then, wipe clean with a sponge. You’re done! Your tile and grout will look brand new. read more

Tile and grout are in many rooms in our homes. The grout and tile also happen to be in high-traffic rooms, which means they are bound to get dirt, mud, spills, and more on them. Over time, tile can become dulled and grout can become stained and discolored. Even if you regularly clean your tile and grout, it may not look cleaner. Why? Because you’re not using the right grout and tile cleaner.

Grout is porous and it needs a special type of grout cleaner to lift tough stains without wrecking the grout. Grout Shield’s grout and tile cleaner and grout maintenance cleaner are pH-balanced and are formulated to lift dirt and tough stains. The grout cleaners make grout and tile look renewed and like new again.

Most home-cleaning products and articles may tell you to clean dirty grout and tile with bleach, ammonia, white vinegar, or other harsh chemicals. Sure, these chemicals and products may work, but they also aren’t really cleaning the grout, and many of these chemicals can actually cause the grout to crack or break. read more

If your grout looks dirty or cracked/broken, you can easily fix this! You don’t need to hire a contractor, a grout-cleaning service or renovate your home. You can avoid spending thousands on re-grouting and tiling your kitchen, bathroom, or other area with tile and grout in or around your home. You can easily clean, repair, seal, and protect your grout lines with Grout Shield’s grout restoration products that can be easily shipped to you in Los Angeles. Our grout cleaners and grout sealers can save you hundreds of dollars and lots of time.

Get your grout and home looking brand-new again with Grout Shield!

To repair grout at home, here are some simple steps to fix it without hiring a professional:

• Buy a grout that matches your current grout (or as close as possible). Add in Grout Shield’s color sealer to match the color of your grout.
• Remove any loose or broken grout.
• Clean the grout lines where you removed the damaged grout with some cold water and towel dry. You can also use Grout Shield’s Grout & Tile Cleaner to lift deep stains.
• Follow the grout instructions to prepare the mixture while also adding in the grout color sealer.
• Fill the lines with the grout and make sure the grout is level and straight.
• Clean the tiles with a sponge.

If your tile isn’t cracked or broken, it might just need a good, proper clean with an actual grout cleaner.

To clean the current grout, use Grout Shield’s grout maintenance cleaner. This grout cleaner will remove any excess dirt or grease from the old or new grout you just placed down. This cleaner will also clean and remove any previous sealer that was on the grout. After the area is cleaned and dry, apply Grout Shield’s Clear Seal. This clear seal can be applied to seal new or older tile and grout installations. By properly sealing your grout, it will prevent it from getting stained or discolored. read more

If you do your own nails, you likely do them in your kitchen or bathroom where there is a flat surface and good light. Unfortunately, spills and drips happen, and you could accidentally get nail polish splattered into the grout lines of a floor or counter. Nail polish is strong and bright, and isn’t an easy stain to make go away.

Since it is porous, grout will absorb the color of the nail polish that spills on it. With the right grout cleaning and sealing products, you can clean up the nail polish and it will look like the nail polish spill never happened. Remember, you want to clean polish stains immediately, so the stain is easier to clean up. Avoid using nail polish remover on the grout lines, as you don’t want to damage your grout.

Our team at Grout Shield can help you get rid of nail polish stains for good. You’ll never know it was there! Besides getting rid of the discoloration, Grout Shield products also rid the grout of bacteria and other harmful germs that get absorbed into the grout lines. read more

If you have dirty or cracked grout, you can easily fix this on your own! You don’t need to hire a grout-cleaning service, or renovate areas of your home. You can avoid spending thousands on re-grouting and tiling your rooms in and around your home. You can easily clean, repair, seal, and protect your grout lines with Grout Shield’s grout restoration products that can be easily shipped to you in Houston. Our grout cleaners and grout sealers can save you hundreds of dollars and lots of time.

Get your grout and home looking brand-new again with Grout Shield!

To repair grout at home, here are some simple steps to fix it without hiring a professional:

• Buy a type of grout that matches your current grout (or as close as possible). Add in Grout Shield’s color sealer to match the color of your grout.
• Remove any loose or broken grout.
• Clean the grout lines where you removed the damaged grout with some cold water and towel dry. You can also use Grout Shield’s Grout & Tile Cleaner to lift deep stains.
• Follow the grout-making instructions to prepare the mixture while also adding in the grout color sealer.
• Fill the lines with the grout and make sure the grout is level and straight.
• Clean the tiles with a sponge.

If your tile isn’t broken, it might just need a good, proper clean with an actual grout cleaner.

To clean the current grout, use Grout Shield’s grout maintenance cleaner. This grout cleaner will remove any excess dirt or grease from the old or new grout you just placed down. This cleaner will also clean and remove any previous sealer that was on the grout. After the area is cleaned and dry, apply Grout Shield’s Clear Seal . This grout clear seal can be applied to seal new or older tile and grout installations. By properly sealing your grout, it will prevent it from getting stained or discolored. read more